Euchner's TZ Extended Solenoid Locking Safety Switches
EUCHNER Design Type 2 Safety Switches are used to protect personnel by monitoring and interrupting the safety circuit depending on the position of the machine guard. The locking solenoid holds the guard closed until a stored energy hazard has passed. It can also prevent damage to a part in process due to an inadvertent machine shutdown. To meet current worldwide standards, safety interlock components cannot be easily bypassed. These switches have positive opening contacts (in accordance to NFPA 79) and redundancy to guarantee that they fail to a safe state. The metal TZ switch has become a standard within the machining industries and is always evolving with each new innovation to safety switches. The TZ extended comes ability to have 3 push buttons with LED (blue/white/yellow) or combination of pushbuttons and a green LED. They come with a plug connector for switch connection and for connection of an enabling switch.
Typical applications include: Machine tool, Robots, Plastic, Grinders, Wood, Food, Crushing, Baling.
Features: 3 push button options (blue/white/yellow)
1 LED green option
Plug connectors for switch and for connection of enabling switch
Solenoid locking
Rotatable actuating head
Actuator overtravel minimizes end stop potential
Large selection of actuators
Tamper proof screws available
Benefits:
Multiple contacts increasing safety capability
Pre-wired plug connector
Manual bypass
Optional slide bolt actuator overcomes actuator misalignment
High locking force
HEAVY DUTY SWITCH!
Technical:
Anodized die-cast alloy housing
Environmental protection IP67- oil and dust tight, and water resistant
Ambient operating temperature -25 to 80C
2 million mechanical operations
Solenoid
|
